Dont forget you can find around new Firmware for example for Z9/Z11 Efudd Firmware,and Hive OS firmwares which can Overclock S9/S15/S17 or Underclock (if your electriciy fee are too expensive), for example my S17 Pro I switched to new firmware (Hive OS) to 36Th/s with 900 Watts power gives me a 2.90 usd/day profit without electricity of course, for Z11 Overclocking without changing PSU from 135 to 150-160Ko/sol. I calculated everything on the basis of 0.15 cens Kw / h. Brand New Miner coming out: ASICminer Zeon Turbo 400,000 Sol/s Equihash Most Profitable Miner in the World. ASICminer Daily Revenue: $27 $16 (less 0.15 Kw/h fee) ASICminer Power Consumption: 2500W asicminer dot co/shop (Factory)
First-time poster here, don’t bully me, apologies for the potentially atrocious formatting :) TL;DR at the end So in the wake of Bitcoin’s explosive rise in value and media attention, I’ve been encouraged by others to share my experience over the past few years as a miner. Here's my story (it's kinda long, you've been warned)
It all started almost three years ago in the beginning of 2015 when Bitcoin flew under my radar. Looking into it, I admittedly wasn’t drawn in because of the decentralisation or the anonymous payments, I was hooked on the idea that anyone could get their hands on some just by running a program and leaving it to do its own thing. I know, how shallow of me. But the idea of making even a bit of money without ‘any work’ was convincing enough for 11-year-old me to do more digging into the matter. To my disappointment, I soon found out that the era of mining Bitcoins with a PC’s CPU or GPU was long obsolete and instead it was all ASICs at that point. So that summer, for my twelfth birthday, I got a little ASIC machine for €60, an Antminer U3. This little thing took up less space than a graphics card but could mine at 60 GH/s. Because, at the time, I didn’t have a controller device that could be kept up and running all day long so it could run the program that mined Bitcoin using the U3, I went ahead and got a Raspberry Pi. After setting up the Pi and installing all the necessary stuff (took an awfully long time), I connected it to AntPool and plugged the U3 in. Two days past and the mining pool sent the first Bitcoin I ever received to my wallet (I was using Blockchain.info). It was just 30 cents worth of BTC but I felt a bit of a rush because I was earning a bit of money through this completely new thing and the idea of that was thrilling. Let’s back up for a second. I just used the term ‘earning’ as if I was profiting, and naive me 2 years ago was no different. In reality, I was at first oblivious to the fact that I was most likely LOSING money overall because of how much energy that little sucker was taking in. But, I was comforted thinking that using that machine was just a practical way of learning about this modern currency and that the loss of several cents’ worth of energy was acceptable in the name of education and learning. Fast forward ten months to the wonderful summer of 2016. I had recently turned 13 and the Antminer U3 had been running on and off throughout. Various pauses and breaks in mining would be observed, as I had to manually get everything up and running after frequent breaks in the Internet connection. You’d expect my newly-turned-teenage brain to lose interest in Bitcoin as it does with many other gimmicks, but – even surprising myself – I miraculously didn’t. Good thing I maintained interest thinking about it now, not so good at the time for my parents. Why do I say this? I felt like it was time to get a little upgrade in my hardware.
Getting an upgrade
Days passed with me comparing every ASIC miner I could at that price point. It was then I set my eyes upon the Antminer S7 (same folks who did my U3, nice). I had put it up against a plethora of other miners and I figured the S7 was my best bet; the thing costs only about 10 times that of my U3 but could run at 4.73 TH/s, almost 80 times as powerful. The only problem being its power consumption was at 1300 watts, which would put a massive dent in the electricity bill and eliminate any profit I would make. Fortunately, I had a secret weapon up my sleeve – or rather my mum did. She had rented out an office outside our apartment where she would keep files and paperwork. The office’s electricity bill was a flat rate as far as I’m aware and it ended up being my saving grace because it virtually got rid of the “oh no I’m actually going to be losing money because of how much electricity I’m eating up” factor, making this whole hardware upgrade viable. After convincing my parents, they finally agreed to shell out the requested amount, with the initial investment being paid back with time. I went to a local Bitcoin vendor and purchased 1 BTC for about $665 in cash (sigh yes, I know. $665 dollars). Shortly after, I used about 0.9 BTC to purchase the Antminer S7 and a 1600W power supply for a grand total of $600. The products would be made and shipped from China so I was definitely in for a wait. A month passes and the package arrives at last. I connected all the wires from the power supply into the S7 and – with great anticipation – I plugged it into the wall to start its first ever run. And what do you know? An extremely loud and high-pitched whirring sound blasted out from the fans on both the power supply as well as the S7. After killing the thing, I questioned my choices. I couldn’t dare put that thing anywhere near my mum’s office in the event it drive everyone in the building absolutely nuts. I was at a loss. However, I soon recovered from my temporarily debilitated state and got working on a solution. The first idea that came to my mind: change the fans. The stocks fans were by Evercool and spun at around 3000 RPM. The power supply used a small, robust fan that looked like a cube that must’ve spun at extremely high speeds judging by how high the sound it produced was. I got my parents to give me some more funding so I could acquire the replacement fans and I did. Bust. After installation and testing, none of the fans would work. I managed to configure the S7 to connect to my Antpool account and the machine would manage mining for several minutes running at peak performance but ultimately be automatically cut off because of how hot the machine was getting (I’m talking about 80 degrees Celsius kinda hot in that thing). The fans got refunded and I was back to the drawing board. After combing through some forum posts and videos, I came across this video and a forum post in which people have their mining rigs placed inside a ventilated, muffled cabinet. Undertaking a project like this would be time-consuming and risky but I had no better ideas so I decided to go through with the idea anyway. Firstly, I sought out a cabinet with suitable dimensions. I managed to get just what I needed at a second-hand IKEA shop. Great. Secondly, I went ahead and acquired some sound-absorbing acoustic foam from a local provider. Fantastic. Finally I had to get a ventilation system going within the cabinet, otherwise, all the hot air would roast the machine alive in there in a bloody mess. With the help of my dad, we found a pair cabinet fans on the Internet that were close to silent but could circulate the air well enough. Eventually, all the materials came and, with the help of my parents, put everything together. The process took quite long time and we had a couple hiccups along the way, but we got it done and it came out pretty nice. The moment of truth came and, to my relief, it ran so much quieter than without the cabinet. It was nowhere near silent but it reduced the noise a great deal. Soon after, I got the thing into the office and set everything up from there. Unfortunately, I was forced to underclock it because you could still hear the machine’s whining from outside the thin office door. Gunning the hashrate down about 25% to 3.7TH/s, I could lower the fan speed without risking the machine burning up. Sure, I wasn’t getting the full potential of the machine but I didn’t complain because electricity was not an issue there and it was still a whole lot better than my U3. With it up and running, I could leave it there, periodically checking to see if it was mining on Antpool.
In the months that followed, I was getting a solid $2.5 worth of BTC on daily basis. Half a year later, May of 2017, I had accumulated a satisfactory $600. I thought, “At this rate, I’d be able to pay my parents’ investment back in a few months” (the total investment came close to $900). Bitcoin had risen to over $1500 so I was already over the moon at that point because of how well everything was going. Little did I know… I hit 0.5 BTC midway through September this year. The price of BTC had dropped after a sudden rise to $5000, but I couldn’t have asked for more. Although I possessed only half the amount of BTC I paid for the machine, its value was over twice that of the initial investment. I thought BTC would level off at around $4000 but nope. In the month of October, the price skyrocketed. Since September, I had only mined 0.017 BTC but the value was already over $3000. It was just a matter of selling it, but I decided to hodl. Good thing I did. As of November 5, I have approximately 0.52 BTC mined in total from my S7, valued at $4000. If I were to sell it right now, I’d have a profit of over $3100. And as for my miner, it’s churning out 0.0006 BTC daily, sounds like nothing but it’s still the equivalent of $5 today and I couldn’t be happier, at least with the miner and Bitcoin. You remember that $665 for 1 BTC that I mentioned earlier? In hindsight, it would’ve been such a better idea to just keep that one Bitcoin and not do anything with it until today (in the interest of making much more money), as I’d theoretically have upwards of $7000. The idea of that still haunts me sometimes if I dwell on it too long but knowing that I’m in possession of an already hefty amount, the pain of it had numbed slightly. It’s not all doom and gloom for me from the exponential increase in Bitcoin’s value, however. Those first $0.3 payments from my humble little U3 all those years ago now are now the equivalent of over $6 today! Bitcoin and everything it encompasses has been and still is a journey of discovery and an adventure. Looking back, starting with a modest €60 Antminer U3 to having a sum of Bitcoin equivalent to two extremely high-end gaming rigs (first thing I could think of as a comparison, sorry) has been something I can’t really describe. Through the course of the past few years, I’ve learned more about technology, I’ve unexpectedly gotten insight into economics and business and – of course – I’ve made a lot of money (if I decide to stop hodling that is). Also, props to my parents for keeping an open mind throughout, I know some parents would be horrified at their kids being involved in something that has been used in some less-than-savoury ways and it's great knowing mine have been supportive all the way. TL;DR got into Bitcoin mining 3 years ago at age 11 with an Antminer U3 that ran at 60 GH/s, got an Antminer S7 (4.73TH/s) and built a sound-muffling, ventilated cabinet for it. Am sat here today with $3000 profit if I decide to sell right now.
Bitmain is regarded as one of the most influential companies in the ASIC mining industry. It is estimated that they have manufactured approximately 53% of all mining equipment.Without including their mining profits, that’s around $140 million dollars in sales. These figures are staggering, but Bitmain’s monopoly of the Bitcoin ASIC market may come to an end, following the release of PowerAsic’s asicpower AP9-SHA256.
About the asicpower AP9-SHA256
Designed with brand new technology and boasting 94 TH/s per miner, the AP(-SHA256 is the most powerful and efficient Bitcoin miner to date.PowerAsic claims they spent $12 million dollars on research, development, and prototypes.PowerAsic also noted that their miners take advantage of ASICBOOST, an exploit of Bitcoin’s algorithm which improves mining efficiency by 20%.An unusual approach separate Powerasic’s miner to the other manufactures is the implementation of copper heat-sink claimed to have a superior thermal conductivity 69% better than aluminium. Don’t take their words for it but confirm the facts are correct on widely well known and published science documents as this one.The first batch of miners were announced and made available for order in August of 2019, with start scheduled for shipment in September, 2019. Powerasic claims that the machines are around 40 percent more productive than the most proficient ASIC on the market, Bitmain’s Antminer S17.According to PowerAsic, they started a mining project with the aim to bring much needed competition to the market…We want to ‘make SHA256 great again.Sitting at the hefty price of $2,795.00, the powerasic AP9-SHA256 is far from affordable for the average person. Fortunately, due to the newly born rivalry between Bitmain and Powerasic, the price will probably lower with time and competition.The power supply for this unit is included and integrated in the top-box also including the controler card as a one unit. You will also get standard power cable, network cable, manual and software in the packet. In comparison to the price of the Antminer S17 , the Powerasic AP9-Sha256 is a better value.
The integrated PSU 3300W has a inputVoltage 220V 50Hz 30A. There are 2 fan 40mm., 1 fan 60mm to keep it cool and the power cable 3 legs following CEE 7 standard.Professional mining hardware runs optimally at 220-240V, hence why mining farms step down their own electricity supply to 220-240V. Note that 220V current is only found outside of the US – American outlets are 110V by default. Unless you want to hire an electrician, this could cause some people trouble adapt to the eficient and recomended 220V power needed, still 110V will get the job done, but they are not ideal for optimum mining performance.
Thanks to the powerasic AP9-HA256’s new 7nm generation of ASIC chips, the AP9-SHA256 has become the most electrically-efficient miner on the market.Consuming merely 30.J/TB, or 2860W from the wall, the 16T is 30% more electrically-efficient than the Antminer S17.
Powerasic ’s new ASIC technology is impressive. When compared to its closest competitor, the Antminer S17, the powerasic AP9-HA256 is the clear winner. It hashes at 94 TH/s, as opposed to the S17’s 56 TH/s. Moreover, the the AP9-HA256 consumes 30J/GH, whereas the S17 consumes 39-45J/TB.The difference in power consumption is miniscule, but when it comes to large-scale mining, the the AP9-HA256’s edge will drastically increase the profitability of a mining operation. This ASIC is profitable not only for mining on a large scale, but for the individual miner as well.Take a look at the projected mining profitability of a single miner:Note that is appears profitable even with high electricity costs ($0.1 per KW/h). With $0.05 / KW/h it’s even more profitable:📷Each powerasic AP9-HA256 will generate about $6,009 per year (calculated with 1 BTC=$10,141.5). Mining profitability may vary. You can usethis free profitability calculator to determine your projected earnings.
Is powerasic AP9-HA256 a Scam?
There is been a lot of talk on Twitter that powerasic AP9-HA256 is a scam. It appears it is not, as many users are already claiming to have received their miners.Slush, the creator ot Slush Mining Pool and the TREZOR hardware wallet, claims on Twitter that he has seen units and knows people who have had their miners delivered:
Verdict: Is The Antminer S17 Outdated?
When the first batch of Bitmain’s Antminer S17 ASICs reached the eager hands of miners, they were all the rage. The S17 was renowned as the most efficient ASIC miner on the market. Many used the S17 as the industry’s golden standard.Up until the launch of the powerasic AP9-HA256, it was the golden standard.But, now?Things have changed.Not only is the powerasic AP9-HA256 more powerful than its predecessor from Bitmain, but also more efficient, and therefore, more profitable.Ever since the announcement of the new ASIC, there was widespread speculation of its legitimacy – and rightly so.The Bitcoin community has been plagued with small, phony companies manipulating images of preexisting antminers as a ploy to hype up their fake products. Nevertheless, powerasic AP9-HA256 is taking things seriously, and their first batch of miners have lived up to expectations.The fact of the matter is, Bitmain’s most powerful and efficient antminer has been dethroned by the new reigning king of ASICs: The powerasic AP9-HA256.
Bitmain has dominated the ASIC market since its inception in 2013.There are a few other companies producing ASICs. However, before the creation of PowerAsics AP9-SHA256., Bitmain was the only company with a proven track record that sold efficient miners directly to the public.Powerasic AP9-HA256 has the potential to bring Bitmain’s monopoly to an end. Powerasic AP9-HA256 has a bright future ahead of them. Now that Bitmain has noteworthy competition, it will be interesting to see how it affects the market. The powerasic AP9-HA256 is the best option (for now) for anyone getting started with mining. Powerasic’s innovation should force other ASIC producers to innovate and force other companies to release new miners with better efficiency. So whether you’re buying a miner now or soon, you’re likely to benefit from the development of this new miner. For more, Visit Us: https://asicpower.net/product.php
The biggest announcement of the month was the new kind of decentralized exchange proposed by @jy-p of Company 0. The Community Discussions section considers the stakeholders' response. dcrd: Peer management and connectivity improvements. Some work for improved sighash algo. A new optimization that gives 3-4x faster serving of headers, which is great for SPV. This was another step towards multipeer parallel downloads – check this issue for a clear overview of progress and planned work for next months (and some engineering delight). As usual, codebase cleanup, improvements to error handling, test infrastructure and test coverage. Decrediton: work towards watching only wallets, lots of bugfixes and visual design improvements. Preliminary work to integrate SPV has begun. Politeia is live on testnet! Useful links: announcement, introduction, command line voting example, example proposal with some votes, mini-guide how to compose a proposal. Trezor: Decred appeared in the firmware update and on Trezor website, currently for testnet only. Next steps are mainnet support and integration in wallets. For the progress of Decrediton support you can track this meta issue. dcrdata: Continued work on Insight API support, see this meta issue for progress overview. It is important for integrations due to its popularity. Ongoing work to add charts. A big database change to improve sorting on the Address page was merged and bumped version to 3.0. Work to visualize agenda voting continues. Ticket splitting: 11-way ticket split from last month has voted (transaction). Ethereum support in atomicswap is progressing and welcomes more eyeballs. decred.org: revamped Press page with dozens of added articles, and a shiny new Roadmap page. decredinfo.com: a new Decred dashboard by lte13. Reddit announcement here. Dev activity stats for June: 245 active PRs, 184 master commits, 25,973 added and 13,575 deleted lines spread across 8 repositories. Contributions came from 2 to 10 developers per repository. (chart)
Hashrate: growth continues, the month started at 15 and ended at 44 PH/s with some wild 30% swings on the way. The peak was 53.9 PH/s. F2Pool was the leader varying between 36% and 59% hashrate, followed by coinmine.pl holding between 18% and 29%. In response to concerns about its hashrate share, F2Pool made a statement that they will consider measures like rising the fees to prevent growing to 51%. Staking: 30-day average ticket price is 94.7 DCR (+3.4). The price was steadily rising from 90.7 to 95.8 peaking at 98.1. Locked DCR grew from 3.68 to 3.81 million DCR, the highest value was 3.83 million corresponding to 47.87% of supply (+0.7% from previous peak). Nodes: there are 240 public listening and 115 normal nodes per dcred.eu. Version distribution: 57% on v1.2.0 (+12%), 25% on v1.1.2 (-13%), 14% on v1.1.0 (-1%). Note: the reported count of non-listening nodes has dropped significantly due to data reset at decred.eu. It will take some time before the crawler collects more data. On top of that, there is no way to exactly count non-listening nodes. To illustrate, an alternative data source, charts.dcr.farm showed 690 reachable nodes on Jul 1. Extraordinary event: 247361 and 247362 were two nearly full blocks. Normally blocks are 10-20 KiB, but these blocks were 374 KiB (max is 384 KiB).
Update from Obelisk: shipping is expected in first half of July and there is non-zero chance to meet hashrate target. Another Chinese ASIC spotted on the web: Flying Fish D18 with 340 GH/s at 180 W costing 2,200 CNY (~340 USD). (asicok.com – translated, also on asicminervalue) dcrASIC team posted a farewell letter. Despite having an awesome 16 nm chip design, they decided to stop the project citing the saturated mining ecosystem and low profitability for their potential customers.
Changenow announced the option to buy DCR with fiat.
TokenPride: "We are seeking feedback on the general setup of our payment processor. We have tried to make it simple and user friendly. 10% of all purchases made in Decred will be donated to the Decred Development fund - and we will be releasing original Decred designs in the future".
BlueYard Capital announced investment in Decred and the intent to be long term supporters and to actively participate in the network's governance. In an overview post they stressed core values of the project:
There are a few other remarkable characteristics that are a testament to the DNA of the team behind Decred: there was no sale of DCR to investors, no venture funding, and no payment to exchanges to be listed – underscoring that the Decred team and contributors are all about doing the right thing for long term (as manifested in their constitution for the project). The most encouraging thing we can see is both the quality and quantity of high calibre developers flocking to the project, in addition to a vibrant community attaching their identity to the project.
The company will be hosting an event in Berlin, see Events below. Arbitrade is now mining Decred.
Campus Party in Brasilia, Brazil. @girino, @Rhama and @matheusd talked about Decred. Matheus was interviewed by a TV channel. Check this quick report about the event, click "Show newer" to continue reading. (photos: 123)
Blockchain Summit in London, UK. This was not a full blown presence with stand but rather investigation of opportunities by @kyle and @Ani. The resulting detailed report is a good example of a document advising to stakeholders whether it is worth spending project funds.
Meetup in Berlin, Germany on July 18. @jz will give a talk and Q&A about Decred and chat with Ele from @oscoin about incentivizing developers. Hosted by BlueYard Capital.
Hey guys! I'd like to share with you my latest adventure: Stakey Club, hosted at stakey.club, is a website dedicated to Decred. I posted a few articles in Brazilian Portuguese and in English. I also translated to Portuguese some posts from the Decred Blog. I hope you like it! (slack)
Decred Assembly - Ep20 - Governance: Driving the Future (youtube) @cburniske and @traceagain discuss the importance of governance protocols being foundational and problems with delegated proof of stake
"I think that developers in the future are going to base their decision on where to build on the basis of governance and community. And so I look for good governance mechanisms and strong communities in blockchains." (@decredproject)
What is on-chain cryptocurrency governance? Is it plutocratic? by Richard Red (medium)
Apples to apples, Decred is 20x more expensive to attack than Bitcoin by Zubair Zia (medium)